Gas Heater Troubleshooting

posted in: Blog | 0

Common Water Heaters Repairs

Winter is just around the corner, and one of the greatest pleasures in life is to have a good warm shower when you come home after work. For that, you need to have your water heater working perfectly; in this blog post, we will explain what the most common water heater repairs are.

However, before any troubleshooting is done, make sure you turn off the power to the electric heater. If the heater works on gas, then turn the gas pilot control valve to the setting ‚Äúpilot,” and turn the warm water supply off.

If the problem with your water heater is that is not heating any water, then it might be a problem with a faulty gas pilot or the gas pilot control valve. If you are a do-it-yourself lover, here we will tell you how to repair it, if not, you can always get assistance from a water heater repairs service. First of all, check if the gas pilot and flame are working correctly, and make sure you replace the gas pilot control valve.

When you detect rust colored water, this might be caused by corrosion occurring inside the glass lined tank or by failing anode rode. Try to repair this fault by replacing the anode rode with a magnesium anode rod. You can buy it from your reliable plumbing supply store.

Finally, if your water smells of rotten egg, this is possibly caused by bacteria in the tank sediment that is fed from the hydrogen gas; you can repair it by flushing the water heater.

If you are looking for a professional water heater repairs company in San Pedro CA, we are just what you are looking for! South Bay Mitigation is a highly professional company, so feel free to call us at (310) 774-2831!